You have 0 samples in your sample kit.
 
  Parametric Search
Inductance Range: µH to µH And/or select a current range: mA to mA
           
  200 Series Layer Wound       Email this page to a Friend!
     
Download this page as a PDF!

If you do not have Adobe Acrobat, click here:

© 2001 Wilco Corporation | All Rights Reserved
       
 
  Notes:
  Coils are wound on phenolic forms, employing solenoid type winding, single layer. Coil form sizes are shown in chart below and leads are No. 20 AWG 1-1/2" long. Leads on the larger forms (208 through 220) are reinforced at the form tp prevent breaking the coil wire if, in assembly, a sharp bend is made in the lead. These coils are impregnated with thermosetting varnish. The following values are available for delivery from stock.
 
  Inductance Tolerances:
• 200 through 205, 15%
• 206 through 220, 10%
 
  Features:
• Solenoid winding for low distributed capacitance
 
  Applications:
• All purpose
• Tuners
• Telecommunications
• Radio, TV
 
Wilco Part Number

L
(uH)

 Test Frequency
(MHz)		 Tol. Q (Nom) SRF Typ
(MHz)		 RDC (Nom) Amps
(mA)		 Diameter
(Nom)		  
200-11 0.24 25 15% 25 390 0.06 1752 0.145
201-11 0.47 25 15% 55 300 0.8 1514 0.145
202-11 0.56 25 15% 50 376 0.09 1430 0.145
203-11 0.68 25 15% 45 268 0.1 1357 0.145
204-11 0.82 25 15% 40 258 0.11 1294 0.145
205-11 1.00 7.9 15% 35 236 0.12 1356 0.145
206-11 1.20 7.9 10% 35 218 0.14 1357 0.145
207-11 1.50 7.9 10% 35 198 0.2 1297 0.145
208-11 1.80 7.9 10% 40 173 0.2 1290 0.176
209-11 2.20 7.9 10% 45 158 0.22 1305 0.176
210-11 2.70 7.9 10% 45 146 0.3 1190 0.176
211-11 3.30 7.9 10% 50 127 0.35 1285 0.207
212-11 3.90 7.9 10% 50 122 0.38 1233 0.207
213-11 4.70 7.9 10% 55 109 0.45 1186 0.207
214-11 5.60 7.9 10% 55 100 0.53 1093 0.207
215-11 6.80 7.9 10% 60 94 0.72 1053 0.238
216-11 8.20 7.9 10% 60 82 0.8 971 0.238
217-11 10.00 7.9 10% 60 74 1 868 0.238
218-11 11.00 2.5 10% 60 67 1.1 968 0.27
219-11 12.00 2.5 10% 60 65 1.2 927 0.27
220-11 15.00 2.5 10% 45 57 2 664 0.27