You have 2 samples in your sample kit.
 
  Parametric Search
Inductance Range: µH to µH And/or select a current range: mA to mA
           
  SMBS35 Series Shielded Inductors       Email this page to a Friend!
     
Download this page as a PDF!

If you do not have Adobe Acrobat, click here:

© 2001 Wilco Corporation | All Rights Reserved
       
 
  Features:
• Small size allows for high mounting density
• Magnetic Shielding Reduces EMI
• Suitable for Re-flow solder
• Large DC current capability with low DC resistance
• Embossed carrier tape available
• Polarity identification available
• Custom inductances available
   
  Applications:
• DC to DC converters
• Switching regulators
• Power supplies
• EMI/RFI filtering
   
  Notes:
  *Operating Temp: -30 to 100 C. External Appearance: Clean and no external defects by visual inspection. Heat Endurance: Heat at 150 C for 3 minutes; then 200 C for 25 seconds. No mechanical or electrical defect after that when back at room temperature. Insulation: Over 100M ohm at 100 Vdc (coil and core). Dielectric: 100 Vdc for one minute (coil and core). Humidity: Deviate +/- 5%, after 96 hours in 90-95% humidity at 40 degrees C and 1 hour of drying. Vibration: Deviate +/- 5%, vibration of 1 hour, three direction: 10-55-10 Hz: 1.5mm p-p amplitude. Shock: Deviate 5% after drop down 100G shock attitude for one time in each direction. Packaging: 600 per reel
 
Wilco Part Number

L
(uH)

 Test Frequency
(MHz)		 Tol. RDC Max
(ohms)		 Amps
(mA)		  
SMBS35-100M 10.00 2.52 Mhz 20% 0.05 2400
SMBS35-150M 15.00 2.52 Mhz 20% 0.07 2100
SMBS35-220M 22.00 2.52 Mhz 20% 0.09 1700
SMBS35-330L 33.00 2.52 Mhz 15% 0.11 1400
SMBS35-470L 47.00 2.52 Mhz 15% 0.15 1200
SMBS35-680L 68.00 2.52 Mhz 15% 0.22 970
SMBS35-101L 100.00 1 Khz 15% 0.34 800
SMBS35-151L 150.00 1 Khz 15% 0.51 650
SMBS35-181L 180.00 1 Khz 15% 0.57 600
SMBS35-221L 220.00 1 Khz 15% 0.77 540
SMBS35-331L 330.00 1 Khz 15% 1.01 440
SMBS35-391L 390.00 1 Khz 15% 1.42 410
SMBS35-471L 470.00 1 Khz 15% 1.57 370